Clearing of film jams
Note
:
Clearing a film jam in the input trays can be performed by
opening only the bottom door. To clear a film jam in another
location, all doors must be opened.
Proceed as follows:
1.
Open the bottom door.
2.
Check both input trays for jammed film.
3.
If there is no jammed film in the input trays, open the top door and middle
door to check the location of the film jam.
4.
Access the top of the printer to check the film transport mechanism for
jammed film.
5.
Close the doors.
Note
:
After removing a jammed film, the number of film sheets
indicated on the display is higher than the actual number of film
sheets in the tray. Make sure to fill the tray of the film printer in
time.
Topics:
•
•
•
Opening the top door and middle door
•
Checking the location of the film jam
•
Accessing the top of the printer
•
Film transport jams (clearing from the top)
52
| Drystar Kiosk Operator Manual | Operation
0401B EN 20211008 1002