AGFA DRYSTAR AXYS, Service Manual

Page: 74 / 461

DD+DIS033.07E
Functional Description
The controlled versi .
1
Introduction
Purpose of the printer
•
High resolution (508 dpi) DICOM network dry printer for:
o
14x17", 14x14", 14x11", 10x12", 8x10" DT2 blue base or clear base films
o
14x11", 10x12", 8x10" DT2 Mammo blue base films
Printing principle
•
Direct thermal on thermo-sensitive, dry films
•
2 input trays and 1 output tray
Main application
•
Well suited to all medical applications, especially Mammo and CR applications
Connections
•
1 Gb/s Network connection (Default: Automatic detection of 10Mb/s and 100Mb/s
network is enabled, automatic detection of 1Gb/s network is disabled)
Service Concept
•
Customer installable
•
No service PC needed for basic installation, maintenance and service, but is
convenient for entering detailed host profile settings
•
Strict modular design: Production assemblies = service assemblies
•
All switches, sensors and motors are monitored via current measurement on
main engine board (Devil CPU)
•
If online diagnosis does not detect the exact reason for the error, an offline check
of the modules can be performed via browser pages
DX-S
CR QS
DOCUMENT CONTROL NOTE:
on of this document resides on MedNet. Any printed copy of this document is uncontrolled
Edition 1, Revision 1 Chapter 2 / 4 DRYSTAR AXYS
06-2009 Type 5367/100
Agfa Company Confidentia
Service
Host
536
602a
d.cd
r
Ultrasound
Printer
Figure 1: Typical network installation of a Drystar AXYS