AGFA DRYSTAR AXYS, Service Manual

Page: 63 / 461

DD+DIS033.07E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 DRYSTAR AXYS Chapter 1 / 27
06-2008 Type 5367/100 Agfa Company Confidential
5.4.3.2 Sharpness Adjustment
(1) Check the DICOM conformance statement whether the modality sends the images
in page mode or image mode.
(2) Select the required smooth factor at the modality to define the sharpness of the
image. See
X
Figure 18
X
.
(3) When finished, print test images from the modality.
(4) Check the image quality together with the customer
(5) In case the image quality is not satisfying continue as described in the flowchart.
See Figure 15.
536401XK.CDR
sharp too sharp less sharp
299
199
101
200
148 143
245 235 251
138
Cubic High Res
Cubic Bell
Interpolation Smooth Factors (DICOM values)
299
200
251 245 235
Limits
Legend
Default
Useable values
Figure 18
NOTE:
Use Cubic Bell interpolation, when the modality sends the images in Page
Mode (images already composed for the film).
Use Cubic High Res interpolation, when the modality sends the images in
Image Mode (printer composes the different images for the film).