AGFA Drystar 5500, Reference Manual

Page: 86 / 266

86
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Removing a modality
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 .
2
On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3
On the ‘Network-Dicom’ screen, press the Down key six times, followed by the
Confirm key to select ‘Remove modality’.
The ‘Remove modality’ screen is displayed:
The modality names, entered during installation of the printer, are shown in the list. If
no names have been entered, the Called AE-titles are shown instead. In case there is
also a nickname (daily used name) defined during installation, the nickname is used.
4
Select the modality which you wish to remove by means of the arrow keys.
5
Press the Confirm key to remove the modality name from the list, or the Escape
key to quit the procedure without any changes.
7 Remove modality
8 Add modality
1 <Modality name>
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 <Modality name>