AGFA Drystar 5500, Reference Manual

Page: 84 / 266

84
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Example: If the Netmask is 250.760.560. 0, then the data entry should be as follows:
5
Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
Changing the Router IP-address
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 .
2
On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3
On the ‘Network-Dicom’ screen, press the Down key five times, followed by the
Confirm key to select ‘Router IP-address’.
The ‘Router IP-address’ screen is displayed:
If the Router IP-address has already been assigned, it will be shown on the display.
4
Enter the Router IP-address by means of the arrow keys. Refer to ‘Data entry’ on
page 33 .
Note that blank spaces will not be filled in (see examples on the next page).
25 .76 . 56 .
e.g. 10.233. 92. 1