AGFA Drystar 5500, Reference Manual

Page: 83 / 266

83
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Changing the Netmask
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 .
2
On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3
On the ‘Network-Dicom’ screen, press the Down key four times, followed by the
Confirm key to select ‘Netmask’.
The ‘Netmask’ screen is displayed:
If the Netmask has already been assigned, it will be shown on the display.
4
Enter the Netmask by means of the arrow keys. Refer to ‘Data entry’ on page 33 .
When no DHCP server is available and when the subnet mask of the printer has
never been set, the subnet mask will be set to the APIPA address 255.255.0.0.
Note that blank spaces will not be filled in (see examples on the next page).
e.g. 255.255.252. 0