AGFA Drystar 5500, Reference Manual

Page: 79 / 266

79
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Changing the Hostname
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 .
2
On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3
In the ‘Network-Dicom’ screen, press the Down key once, followed by the
Confirm key to select ‘Hostname’.
The ‘Hostname’ screen is displayed:
If the Host name has already been assigned, it will be shown on the display.
4
Change the hostname by means of the arrow keys. Refer to ‘Data entry’ on
page 33 . Make sure not to enter more than 16 characters.
5
Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
Entries are case sensitive.
e.g. ds5500