AGFA Drystar 5500, Reference Manual

Page: 39 / 266

39
2900H EN 20071108 Basic operation (operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Managing the print queue
You can always check the status of the print jobs.
As long as the jobs are not yet submitted for printing (i.e. they are still in the
‘waiting’ status), you can assign emergency priority and delete individual
print jobs.
Checking the print queue
If jobs have been transmitted from the network to the Drystar 5500, they are
put in the print queue on a first in, first out schedule. New jobs that are added
to the queue get the ‘waiting’ status.
As soon as the last film of a job is ejected in the output tray, the next job that
has been calculated will be put in printing status.
Example of the Print queue screen:
• The first line shows information on the job that is currently being printed:
modality name, a nickname (if defined), time of receipt of the job and the
job status.
• The second line shows how many films are to be printed for the current job,
and also what film from that total is currently being printed.
•
On the third line you can watch the progress of the printing process. The
progress indicator is gradually filled from left to right, from 0% to 100% as
the process is completed. If no job is being printed, the progress indicator
will show the proceeding of the calculation process of the next job.
Keep in mind that one print job can hold several films to be printed. In accordance
with the acquisition modality used, and the actual settings, films can be grouped in
a folder to be submitted as one print job for the Drystar 5500. Refer to the User
manual of the acquisition modality for more information.
<Modality name> 10:21:34 PRINTING
1 2
<Modality name> 10:21:34 CALCULATING
<Modality name> 11:35:27 WAITING
<Modality name> 11:54:02 WAITING