manualshive.com logo in svg

AGFA Drystar 5302, Technical Documentation Manual

Share
Download
AGFA Drystar 5302 Technical Documentation Manual Download Page 317

 
 
DD+DIS150.05E 

Repair and Service

Software Releases and Patches

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. 

8 

Software Release 1.9.2_C1 

 

Type of new Software* 

Software Upgrade 

Release Date 

11/2008 

Printer Serial Numbers 

≥

 SN 7069, plus 6827, 6867, 6887, 6902, 

6917, 7067, 7052 and 7057 

Availability 

MedNet, GSO Library 

Prerequisites 

None 

 

 

 

*NOTE: 

  A software upgrade is a functional extension. An update (software patch) is an 

internal change designed to correct bugs, fix defects, or otherwise minor 
improvements to performance without changing the software's basic design, 
structure or functionality. 

  On MedNet, GSO Library always the latest available software release can be 

downloaded. 

 

8.1 

Solved Software Bugs 

 

Software 1.9.2_C1 solves following software bugs: 

 

Symptom 1 

Sporadically the printer stops boot-up with message “Error System Failure”: 

  When pressing the ON/OFF switch the printer cannot be switched off. 

  Access via network is not possible (to reboot remotely). 

  After unplugging and reconnecting the mains cable the printer usually starts up 

normally. 

 

Cause 

CPU Driver problem 

 

Edition 1, Revision 2 

DRYSTAR 5302 

Chapter 3.8 / 15 

03-2011 Type 

5366/100 

Agfa Company Confidential

 

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands