AGFA Drystar 5302 Technical Documentation Manual Download Page 314

Page: 314 / 459

DD+DIS150.05E

Repair and Service

Software Releases and Patches

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

6.1

Solved Software Bugs

Symptom 1

Sporadic film jams in the output module and corresponding error message:
“Film jam - Open top cover and clear film jam”



The fault mainly appears with 8x10” or 12x10” films printed from the lower tray.



With lower probability the fault may also happen:

With other film formats (14x17”, 14x14”, 14x11”) printed from the lower tray

With any film format printed from the upper tray

Symptom 2

Top border is too large (> 7 mm);
images possibly printed until the
trailing edge of the film.

tio

approx. 6 mm

O.K.

NOT O.K.

> 7 mm

Figure 1

Cause

Software fault in software 1.9.0_C3

Edition 1, Revision 2

DRYSTAR 5302

Chapter 3.8 / 12

03-2011 Type

5366/100

Agfa Company Confidential

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands

AGFA Drystar 5302, Technical Documentation Manual

Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands