AGFA Drystar 5302 Technical Documentation Manual Download Page 127

Page: 127 / 459

DD+DIS150.05E

Repair and Service

Machine specific tools, software tools and auxiliary means

Printed copies of this document are not controlled.

The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.

Edition 1, Revision 0

Drystar 5302

Chapter 3.2/25

2.5.4

Connection to the web pages

USAGE

(1) Connect the Service PC to the

network

(2) Start the browser (Internet

Explorer

≥

(3) Enter the IP address of the printer

in the address window.
In case the printer homepage is
not displayed, refer to 2.5.4.1
‘Adaptation of the PC IP address‘
next page.

536632el.cdr

Printer

Service PC

Figure

Printer

536632ek.cdr

Crossed UTP network cable

Figure 20

As an alternative

, if it is not possible

to put the Service PC into the hospital
network:
(1) Use a crossed network UTP cable

to connect the network interface
of the Service PC directly with the
network interface of the printer.

(2) Start the browser (Internet

Explorer

≥

(3) Enter the IP address of the printer

in the address window. In case
the printer homepage is not
displayed, refer to 2.5.4.1
‘Adaptation of the PC IP address‘
next page.

2005-09-09 (Type

5366/100)

Agfa Company Confidential

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands

AGFA Drystar 5302, Technical Documentation Manual

Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands