manualshive.com logo in svg

AGFA DRYSTAR 5302 100, Service Manual, Page: 307 / 465

Share
Download
AGFA DRYSTAR 5302 100 Service Manual Download Page 307

 
 
DD+DIS150.05E 

Repair and Service

Software Releases and Patches

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. 

Edition 1, Revision 5 

DRYSTAR 5302 

Chapter 3.8 / 5 

02-2015 

Type 5366 /100/300 

Agfa Company Confidential

 

1 

Software Release 1.8.0_C1 

 

Type of new Software 

1st customer release 

Release Date 

09/2005 

Printer Serial Numbers 

 SN1001 

Availability 

On the Agfa HealthCare Library only the 
latest software release can be downloaded. 

Prerequisites 

None 

 

 

1.1 

Supported Features 

 

All features as specified: 

 

Printing diagnostic data according to the DICOM standard with a  
resolution of 320 dpi 

 

Printing on Drystar DT2B and DT2C films 

 

Supported film sizes: 
14x17", 14x14", 14x11", 10x12", 8x10" 

 

Support of the new thermal model TMML, commercial name "A#sharp" 

 
 
 

1.2 

Limitations 

 

Software 1.8.0_C1 has following limitations: 

 

User Interface screens are only available in Dutch, English, French, German, 
Italian, Norwegian, Portuguese, Spanish and Swedish language. 

 

RF tag overrule functionality (printing with Dmax = 2.0 O.D.) not yet implemented 

 

Only Microsoft Internet Explorer 5.5 or higher is usable as browser application. 

 

Summary of Contents for DRYSTAR 5302 100


















































































































































































































































































































































































































































































Reviews:

No comments