AGFA Drystar 5300, Reference Manual

Page: 71 / 210

71
2920B EN 20031206
Changing the domain name
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59 .
2
On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3
On the ‘Network (DICOM)’ screen, press the Down key twice, followed by the
Confirm key to select ‘Domain name’.
The ‘Domain name’ screen is displayed:
If the Domain name has already been assigned, it will be shown on the display.
4
Enter the domain name by means of the arrow keys. Refer to ‘Data entry’ on
page 27 .
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
CS
1 Printer AE_Title
2 Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6 Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
Domain name:
[ D ef_Dom_name ]
(max. 16 char)