AGFA Drystar 5300, Reference Manual

Page: 69 / 210

69
2920B EN 20031206
Changing network (DICOM) configuration
Changing the printer AE_Title
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59 .
2
On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3
Press the Confirm key to select ‘Printer AE_Title’.
The ‘Printer AE_Title’ screen is displayed:
If the printer AE_Title has already been assigned, it will be shown on the display.
4
Change the printer AE_Title by means of the arrow keys. Refer to ‘Data entry’
on page 27 . Make sure not to enter more than 16 characters.
"
Entries are case sensitive.
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
CS
1 Printer AE_Title
2 Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6 Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
Printer AE_Title:
[ D rystar ]
(max. 16 char)