AGFA Drystar 5300, Reference Manual

Page: 65 / 210

65
2920B EN 20031206
Changing the input tray settings
Changing the film view
Using the following procedure you can change the film view.
1
Perform steps 1 and 2 of the ‘Accessing the Change settings menu’
procedure on page 59 .
2
On the Change settings menu, press the Down key, followed by the Confirm
key to select ‘Input tray’.
The ‘Input tray’ screen is displayed:
3
Press the Confirm key to select ‘Film view’.
The ‘Film view’ screen is displayed:
The currently active film view is marked with a ‘*’.
4
Press the up/down arrow keys to select the film view.
5
Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
CS
1 Film view
2 Film type
3 Film format
CS
1*Normal
2 Back