AGFA DR 10s User Manual Download

Page: 83 / 112

Charging a battery

To charge a battery using the battery charger:

Connect the power supply to the mains power and to the power socket of

the battery charger.

Insert the battery in an empty slot of the battery charger.
The battery charger automatically detects the battery and starts charging

the battery.
The battery status can be read from the indicator lights.
The charge level of the battery is monitored and it is kept at maximum

level until the battery is removed from the battery charger.

Remove the charged battery from the battery charger.

Related Links

Safety Directions

on page 62

DR Detector Battery Charger

on page 19

Topics:

•

Inserting the battery in the battery charger

•

Battery charger indicator lights

DR 10s | Advanced Operating |

0351A EN 20190319 1349 *

Summary of Contents for DR 10s

















































































































Search results

Summary of Contents for DR 10s

Reviews:

Related manuals for DR 10s

Brands by name

Popular brands

AGFA DR 10s, User Manual

Search results

Summary of Contents for DR 10s

Reviews:

Related manuals for DR 10s

Brands by name

Popular brands