AGFA CR, User Manual, Page: 13 / 32

13
2313B EN 20041109 Introducing the CR User Station
CR U
SER
S
TATION
•
Make sure that the two safety caps are mounted on top of the right side
rollers in case of a stand-alone CR User Station (this means that the
CR User Station is not connected to a CR 25.0 Digitizer), as shown below:
Safety precautions for the monitor
•
The monitor must be fixed on the monitor arm with screws.
•
If the monitor arm is re-positioned in a different height the lock must be
closed.
Safety instructions for cleaning the
CR User Station
•
Pull the power plug out of the CR User Station prior to cleaning the
equipment and switch off the UPS (Uninterruptible Power Supply) if
installed.