manualshive.com logo in svg

AGFA CR 10-X, Service Manual, Page: 265 / 288

Share
Download
AGFA CR 10-X Service Manual Download Page 265

 
 
DD+DIS170.11E 

Installation Planning

1

2

3

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. 

  

3.2 

Guidelines for Placing the Digitizer 

 

Observe following guidelines for the installation place of the digitizer: 

 

 

Recommended table height: 75 cm 

 

Due to the workflow* of the system it is recommended to install digitizer and  
NX workstation close together. 

* The operator has to go from digitizer to the NX workstation and back to the digitizer for each  

scan cycle. 

 

 

WARNING: 

The device is a table-top digitizer. The structure and stability of the table used need to 
be suitable in relation with the size and weight of the system. Do not use excessive 
force when inserting cassettes in the digitizer as the device may slip or drop off the 
table. Use a non-slip-mat below the digitizer or other anti-skid measures. The table 
should not be subject to excessive shock and vibrations from other sources, as this 
may disturb the operation of the digitizer. 

 

Edition 1, Revision 1 

CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 11 of 24 

03-2013 

Type 5151 / 100 / 110 / 200 / 210 

Agfa Company Confidential

 

Summary of Contents for CR 10-X

































































































































































































































































































Reviews:

No comments