AGFA CR 10-X Service Manual Download Page 134

Page: 134 / 288

DD+DIS155.11E

Repair and Service

Tools and auxiliary Means

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

2.4.6

Error Viewer Installation

Purpose

The menu “Error Viewer Installation” allows to install the error viewer on the connected
PC from the browser.

Usage

(1) If the error viewer is already installed

on the NX workstation, i.e. if the error
viewer icon is present on the task bar:

De-install the error viewer in

Control

Panel > Programs and
features

(2) Select service menu:

<Error Viewer

Installation>

(3) Click:

<ErrorViewerInstaller.msi>

(4) Follow the further instructions.

Figure 13

NOTE:

The error viewer installation is also part of the installation procedure of the digitizer.

Edition 1, Revision 1

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 18 of 31

03-2013

Type 5151 / 100 / 110 / 200 / 210

Agfa Company Confidential

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 134 / 288

Search results

Summary of Contents for CR 10-X

Reviews: