manualshive.com logo in svg

AGFA CR 10-X, Service Manual, Page: 128 / 288

Share
Download
AGFA CR 10-X Service Manual Download Page 128

 
 
DD+DIS155.11E 

Repair and Service

Tools and auxiliary Means

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. 

 

2.3.3 

Service Activity Logfile 

 

Purpose 

The menu Service Activity Log shows a logfile of all actions carried out with the help of 
the service user interface. 
 

Usage 

(1)  Select service menu:  

<Service Activity Log>

 

(2)  Right-click on the link 

<Save 

ServiceActivity.log as ...>

 

to save it on the connected PC.

 

 

 

 

Figure 8 

 

 

NOTE: 

The “ServiceActivity.log” file is part of the backup. 

 

Edition 1, Revision 1 

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 12 of 31 

03-2013 

Type 5151 / 100 / 110 / 200 / 210 

Agfa Company Confidential

 

Summary of Contents for CR 10-X

































































































































































































































































































Reviews:

No comments