manualshive.com logo in svg

AGFA CR 10-X, Service Manual, Page: 127 / 288

Share
Download
AGFA CR 10-X Service Manual Download Page 127

 
 
DD+DIS155.11E 

Repair and Service

Tools and auxiliary Means

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. 

 

2.3.2 

Error Statistics 

 

Purpose 

The menu “Error Statistics” shows the frequency for all occurred errors for 
troubleshooting purposes.  
The same information is also displayed at the end of the info counter.  
See section 2.3.1. 
 

Usage 

(1)  Select service menu:

  

<Error Statistics>

 

(2)  Right-click on the link 

<Save 

errorList.txt as ...>

 to save 

it on the connected PC. 
 

 

 

Figure 7 

 

 

NOTE: 

For the explanation of the error codes use the function “Error Code Explanation”.  
See section 2.5.1. 

 

Edition 1, Revision 1 

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 11 of 31 

03-2013 

Type 5151 / 100 / 110 / 200 / 210 

Agfa Company Confidential

 

Summary of Contents for CR 10-X

































































































































































































































































































Reviews:

No comments