![AGFA Auto QC2 User Manual Download Page 87](http://html.mh-extra.com/html/agfa/auto-qc2/auto-qc2_user-manual_2866624087.webp)
Editing X-Ray Tube information
In the Main Menu window of Auto QC² Software the user or service engineer
can configure X-Ray Tubes.
To configure X-Ray Tubes:
In the Configuration panel in the top section of the Main Menu window,
select X-Ray Tube.
The workspace of the Main Menu window is filled with the X-Ray Tube list
and an extra bar with a number of action buttons.
Figure 68: Main Menu window with X-Ray Tube list and action buttons.
Topics:
•
•
Updating Settings of an Existing X-Ray Tube
•
•
Closing the List of X-Ray Tubes
Auto QC² | Main Menu |
87
2370C EN 20180330 1524