AGFA 8207/050 User Manual Download Page 68

Page: 68 / 83

Stopping the System

To stop the system:

Stop the NX workstation.
NX can be stopped in two ways, either by logging out of Windows or

without logging out of Windows.
For detailed information on stopping NX, refer to the NX User Manual,

document 4420.

Note

Stopping the NX workstation does not stop the DR

Detector. If the power of the DR Detector remains on, no

warming-up time will be needed after starting the NX

workstation.

Press the Power OFF button on the X-ray generator control box to switch

off the generator.

In a configuration with a wireless DR Detector, power off the DR Detector:

• turn off the DR Detector.
• remove the battery pack.

Switch off the DR Generator Sync.

Note

If the DR Detector is powered down, a warming-up may be

required on the next start-up.

| DX-D 300 | Operation

0172E EN 20181116 1653

Summary of Contents for 8207/050




















































































Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands

AGFA 8207/050, User Manual

Search results

Summary of Contents for 8207/050

Reviews:

Related manuals for 8207/050

Brands by name

Popular brands