Capacitor Kit d-lab.1
AGFA d-lab.1
CM+9.8072.9003.0/DD+18070312D0/PN04073_00
1
1
List of possibly affected machines
Only a few machines are affected. So it is necessary to check the capacitors before they are replaced.
All Print Engines with modification code „B06“ or higher have already correct capacitors installed.
A list, sorted by serial number and country can be found at the end of this documentation (Chapter „
Attachment
“).
2
Contents of the kit
– 2 capacitors 100uF/20V
– Solder
wick
2.1 Additional
tools
– Soldering iron (power max. 30W) with a thin bit
– ESD wrist band
– Heat
sink
compount
– Torch
– Pair of tweezers
– Socket wrench 5.0 mm and 5.5 mm
