Maintenance
WARNING:
Improper, irregular or lack of maintenance of the equipment can
lead to injuries to persons (e.g. by radiation hazard) and
property damage as a result of malfunctions and defects of the
equipment.
WARNING:
Wear of equipment due to excessively long intervals between
service may lead to personal injury and property damage due to
worn and unsafe parts.
WARNING:
The manufacturer is responsible for safety features of its own
products, only provided that maintenance, repairs and
modifications are performed exclusively by the manufacturer's
personnel or by personnel expressly authorized by the
manufacturer. The manufacturer can't be considered
responsible for any error, damage or injury caused by improper
use or lack of maintenance of the equipment.
WARNING:
Incorrect or defective spare parts may adversely affect the safety
of the system and lead to damages, malfunctions or total failure.
Use only original spare parts provided by the manufacturer.
In order to assure a continuous and safe performance of the equipment, a
periodic maintenance program must be established. It is the owner’s
responsibility to supply or arrange for this service.
There are two levels of maintenance, the first consists of tasks which are
performed by the user/operator, and the second are those tasks to be
performed by qualified X-ray service personnel.
Always consult the Agfa Service documentation and an AGFA trained and
authorized Service engineer for complete maintenance schedules.
Topics:
•
Preventive maintenance schedule
•
72
| DR 100s | Introduction
0411D EN 20220627 1040
