AGFA 5540/100 User Manual Download Page 47

Page: 47 / 211

Warning labels on the radiographic table

1,2,3,6

3,6

3,4,5,6

3,6,7

4,8

Figure 23: Warning labels on the radiographic table

Warning

Falling hazard. To avoid injuries, be alert when the patient is

getting on or off the table.

Danger

Do not sit on the edge of the table.It may cause severe injury

due to the movement of the table.

Warning

Pinch point. Keep hand and fingers away from this area.

Warning

Risk of electrical shock. Disconnect the power supply of the

equipment prior to inspection or maintenance.

Danger

Never disassemble of let an unauthorized person modify

and/or repair the product.

Caution

Read and understand the user manual before operating this

equipment.s

10kg

Maximum load capacity is 10 kg on the bucky drawer when it

is pulled out. Do not lean or sit on the bucky.

Caution

Valory (system with floor mounted column) | Introduction |

0426A EN 20220804 1858

Summary of Contents for 5540/100




















































































































































































































Search results

Summary of Contents for 5540/100

Reviews:

Brands by name

Popular brands

AGFA 5540/100, User Manual

Search results

Summary of Contents for 5540/100

Reviews:

Brands by name

Popular brands