AGFA 5540/100 User Manual Download Page 44

Page: 44 / 211

Labels

Symbol

Explanation

General warning, caution, risk of danger.

Read and understand all instructions and warning labels in the

product documentation before using the equipment. Keep man-

ual for future reference.

Ionizing radiation

Dangerous voltage

Pinch Points

Hot Surface Warning
Indicates that touching the part indicated can cause burns.

Laser Warning
Indicates the presence of a laser device.

Do not sit Warning
Indicates that sitting on a component can cause damage to the

equipment.

Alternating current

Protective earth (ground)

On (power: connection to the mains)

Off (power: disconnection from the mains)

| Valory (system with floor mounted column) | Introduction

0426A EN 20220804 1858

Summary of Contents for 5540/100




















































































































































































































Search results

Summary of Contents for 5540/100

Reviews:

Brands by name

Popular brands

AGFA 5540/100, User Manual

Search results

Summary of Contents for 5540/100

Reviews:

Brands by name

Popular brands