manualshive.com logo in svg

AGFA 5540/100, User Manual

Share
Download
AGFA 5540/100 User Manual Download Page 125

Tube head display

The tube head display shows the positioning parameters and status

information.

1

3

2

4

5

1.

Readout value of X-ray tube angle (alpha)

2.

Readout value of source image distance (SID)

3.

Icon displayed if automatic centering and position tracking is active

4.

Alignment of X-ray tube and DR detector bucky

5.

Bucky status

Figure 53: Positioning parameters for table exposures

While pressing and holding a positioning button, a corresponding icon is

displayed on the tube head display.

Status information on the tube head display

Table 26: X-ray tube centering

The X-ray tube and the DR detector are aligned.

The X-ray tube and the DR detector are not aligned. It is not

possible to perform an exposure.

Valory (system with floor mounted column) | Tube head display | 

125

0426A EN 20220804 1858

Summary of Contents for 5540/100




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands