The Control Console
The control console is displayed on the touch screen of the DX-D 100 mobile X-
ray unit. It consists of two parts:
• the NX application, to define patient information, select exposures and
process the images
• the software console, to manage X-ray generator settings
Figure 6: NX application and DX-D 100 software console
Whenever you need to type text you can open the “virtual keyboard”.
Related Links
on page 58
DR Detector Switch on the NX Workstation
The DR Detector Switch is available in the title bar of the NX application. The
DR Detector Switch shows which DR Detector is active and shows its status.
The DR Detector Switch can be used to activate another DR Detector.
It is positioned in the title bar of the NX application.
DX-D 100 | Introduction |
19
0187K EN 20191024 1609
