AGFA 5367/300, User Manual

Page: 74 / 168

Checking the print queue
You can always check the status of the print jobs on a connected remote access
PC via the operator menu.
Note : Keep in mind that one print job can hold several films to
be printed. In accordance with the acquisition modality used,
and the actual settings, films can be grouped in a folder to be
submitted as one print job. Refer to the User manual of the
acquisition modality for more information.
If jobs have been transmitted from the network to the printer, they are put in
the print queue on a first in, first out schedule. New jobs that are added to the
queue get the ‘waiting’ status.
As soon as the last film of a job is ejected in the output tray, the next job that
has been calculated will be put in printing status.
74 | Crystal-M Imager | Basic Operation (operator mode)
3852B EN 20210601 1655