AGFA 5366/500 User Manual Download

Page: 83 / 148

Loading films

This section describes how to load the printer with appropriate films.
The printer can be loaded with 8x10”, 10x12”, 11x14”, 14x14” and 14x17”

films.

Note

If you want to change the film format, the tray

configuration must be modified.

The printer will inform you in several ways when a film tray is empty:

• an audible signal,
• the status indicator LED is blinking (red color),
• the display screen shows a message informing you that the input tray is

empty.

The film loading procedure is identical for both input trays. In the examples

below, we will assume that the lower input tray is to be loaded.

Note

The procedure is slightly different, depending on the fact

wether the printer is printing/calculating or in the ready state.

WARNING:

Never load an additional film sheet or film sheets to a film pack

in use. Only load a new film pack when the current input tray is

empty.

Related Links

Changing the film format of the trays

on page 80

Topics:

•

When the printer is printing or calculating and an input tray is empty

•

When the printer is in the ready state and an input tray is empty

•

Film loading procedure

•

Checking the correct position of a film in the input tray

DRY 1.4, DRY 2.4 | Basic Operation (operator mode) |

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands