AGFA 5366/500 User Manual Download

Page: 40 / 148

Connectivity

The printer must only be used in combination with other equipment or

components if these are expressly recognized by the manufacturer as

compatible. A list of such equipment and components is available from your

local service representative on request.
Changes or additions to the equipment must only be carried out by persons

authorized to do so by the manufacturer. Such changes must comply with best

engineering practice and all applicable laws and regulations that have the

force of law within the jurisdiction of the hospital.
The printer is a standard network printer. This means that you can just plug it

into the (existing) ethernet network without any additional options or

accessories. The printer is also a native DICOM printer. Therefore the

standard DICOM protocol can be used as network protocol, and again without

any additional options or accessories the printer will be able to process and

print the DICOM jobs.

Safety compliance

Accessory equipment connected to any interfaces must be certified according

to the respective IEC standards (e.g. IEC 62368 for data processing equipment

or IEC 60601-1 for medical equipment). Furthermore all configurations shall

comply with the requirements for ME systems according to IEC 60601-1.

Everybody who connects additional equipment to the signal input part or

signal output part configures a medical system, and is therefore responsible

that the system complies with the requirements for ME systems according to

IEC 60601-1. If in doubt, consult your local service organization.

| DRY 1.4, DRY 2.4 | Introduction

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands