AGFA 5366/400 User Manual Download

Page: 91 / 148

Advanced Operation (key-operator mode)

The printer features the following functions on the main menu level of the

Key-operator mode:

Menu item

Function

Show settings

To consult the current settings of the printer.

Change settings

To change the current settings of the printer.

Print image

To print one of the standard test images. To load

and print images from a USB flash drive.

Save configuration

To make a back-up of the printer settings.

Restore configuration

To restore the back-up of the printer settings.

Calibration

To calibrate the printer.

Service actions

To view error and maintenance data.

Quality Control

To perform the QC procedure.

Installation

To install or update the printer software.

Note

These functions are described in detail in the Reference

manual.

Topics:

•

The menu structure

•

Quality Control

Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode) |

3731D EN 20210601 1655

Summary of Contents for 5366/400





















































































































































Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands

AGFA 5366/400, User Manual

Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands