AGFA 5366/400 User Manual Download

Page: 68 / 148

Switching on the printer

Note

Before switching on the printer, read the safety

instructions.

Follow the procedure below to ensure proper start-up of the printer and to
check that everything is working correctly.

Check that the power cord is plugged in and then switch on the printer by

pressing the

Power/Reset

button.

A startup screen is displayed on the touchscreen.
After startup, the following message is displayed. After a short while, a

progress indicator will show the progress of the self-test.

Note

It takes approximately 9 minutes before the printer can start

printing. After approximately 6 minutes the READY message

appears and from then on you can send print jobs to the

printer, but it will take another five minutes for the printer

head to heat up. When you send print jobs to the printer

during this five minutes, the printer will use that time to

calculate the print job and the display will inform you that

the printer is warming up.

The printer is ready for operation:
• If, on the front panel display, the READY message is shown,

the status

indicator LED is constantly green.

• If, on the front panel display, the print queue screen is shown,

the

status indicator LED is green and blinking.

| Drystar 5301 XL, Drystar 5302 XL | Introduction

3731D EN 20210601 1655

Summary of Contents for 5366/400





















































































































































Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands

AGFA 5366/400, User Manual

Search results

Summary of Contents for 5366/400

Reviews:

Related manuals for 5366/400

Brands by name

Popular brands