Cleaning the print head
WARNING:
Print head cleaning must be done when image quality problems
occur.
To clean the print head:
1.
Press the Key-operator key to enter the Key-operator mode.
2.
On the Key-operator main menu, press the Down key five times, followed
by the Confirm key to select ‘Calibration’.
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
Reachable with Up/Down arrow keys
Visible
3.
On the Select calibration menu, press the Down key, followed by the
Confirm key to select ‘Clean therm. head’.
4.
The ‘Thermal head cleaning’ screen will give step-by-step instructions on
what to do:
5.
Open the top cover.
6.
As soon as the top cover is opened, the ‘Thermal head cleaning’ screen
continues giving the following instructions:
Drystar 5301 XL, Drystar 5302 XL | Preventive maintenance schedule |
109
3731D EN 20210601 1655
Summary of Contents for 5366/400
Page 1: ...Drystar 5301 XL Drystar 5302 XL 5366 410 5366 400 User Manual 3731D EN 20210601 1655 ...
Page 12: ...12 Drystar 5301 XL Drystar 5302 XL Drystar 5301 XL Drystar 5302 XL 3731D EN 20210601 1655 ...
Page 57: ... The display Drystar 5301 XL Drystar 5302 XL Introduction 57 3731D EN 20210601 1655 ...
Page 141: ...Drystar 5301 XL Drystar 5302 XL Plug Play Installation Manual 141 3731D EN 20210601 1655 ...
