AGFA 5364/100 User Manual Download Page 78

Page: 78 / 165

Loading films

This section describes how to load the printer with appropriate films.
The printer can be loaded with 8x10”, 10x12”, 11x14”, 14x14” and 14x17”

films.

Note

The printer can be loaded with new films in full daylight.

Loading films is easy and can be done in no time. Follow the

procedures as described in this section.

The printer will inform you in several ways that an input tray is empty:

• An audible signal,
• the Status indicator LED is flashing (red color),
• the Unlock button LED is flashing,
• the display screen shows a message informing you that either the upper or

lower input tray is empty.

The film loading procedure is identical for both input trays. In the examples

below, we will assume that the

lower

input tray is to be loaded.

Note

The procedure is slightly different, depending on the fact

wether the printer is printing/calculating or in the ready state.

WARNING:

Never load an additional film sheet or film sheets to a film pack

in use. Only load a new film pack when the current input tray is

empty.

Topics:

•

When the printer is printing or calculating

•

When the printer is in the ready state

•

Film loading procedure

•

Checking the correct position of a film in the input tray

| Drystar 5500, Drystar 5503 | Basic Operation (operator mode)

2901J EN 20191018 0826

Summary of Contents for 5364/100






































































































































































Search results

Summary of Contents for 5364/100

Reviews:

Related manuals for 5364/100

Brands by name

Popular brands

AGFA 5364/100, User Manual

Search results

Summary of Contents for 5364/100

Reviews:

Related manuals for 5364/100

Brands by name

Popular brands