4.3.2.3 Make an angle wayline (A+ heading)
Procedure
1.
Set the angle of the waylines.
Valtra Guide shows the angle to which the
head of the tractor points.
0° is North, 90° is East, 180° is South and
270° is West.
2.
Tap
to accept.
The selected angle appears.
Parallel waylines show on the left (negative
numbers) and right (positive numbers) side of
the tractor. The system calculates the
wayline intervals from the preset implement
width and overlap.
GUID-A75C4A0D-677C-422C-9C3C-1CA0C00D254C-high.jpg [High]
Fig. 9
(1)
Angle
(2)
Accept
(3)
Angle wayline
(4)
Start of wayline
(5)
End of wayline
4.3.3 Engage Valtra Guide
Procedure
1.
Make sure that Valtra Guide is pre-activated.
2.
Start to drive.
Valtra Guide can operate when the tractor speed is between 0,1km/h - 25 km/h.
3.
Turn the steering wheel.
Valtra Guide does not engage if you have not turned the steering wheel in 5 minutes before you push
the engage Valtra Guide.
GUID-BA1704E6-AE5F-495A-8FAE-9D1C4AD63D73 [V2]
GUID-69546A6F-AB03-4B20-8C3E-F0A65B4A1E77 [V5]
4. Valtra Guide operation
56
Smart farming
39 924 21 5
Summary of Contents for Valtra Smart farming
