1.7.2 Install the guards
IMPORTANT:
To install the side and bottom guards, move the machine to a smooth horizontal location. Lower all
implements to the ground and lower the 3-point linkage to the ground. Make sure that the transmission
control lever is in the park position. Stop the engine, apply the parking brake, and take the key with you.
Procedure
1.
Install the bolts and the washers, (1) to install
the guards for access below the machine.
1
TREJA0110115901
GUID-AEB9105C-B85D-4FDD-A295-DC1070EC38EB-high.eps [High]
Fig. 22
2.
Install the bolts and the washers,(1),(2),(3), to
install the guards on the left side of the
transmission housing.
3
2
1
TREJA0110035001
GUID-A5C68D43-2532-4D89-9C8E-667C46806BBA-high.eps [High]
Fig. 23
3.
Install the bolts and the washers, (1) to install
the guards to the fuel tank and the DEF tank
on the right side of the machine.
1
1
TREJA0110041401
GUID-C45B3B02-CA0D-46CB-B5D6-414EB08C103C-high.eps [High]
Fig. 24
1.7.3 Remove the engine fan guards
NOTE:
When the words right and left are used in this manual, it is in reference to the direction the operator
is facing the front windscreen.
GUID-B797DEF7-2CB0-4E59-B6B1-3346DE3B7321 [V1]
GUID-58ACAA62-EA9D-4B18-A9CC-F2FA799FA58D [V4]
1. General
1-26
Rubber Track Tractor
79036240F
