Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
Manual Operation
To cook food using a specific entered time and power level:
1. Open oven door and place food in oven. Close door.
2. Press POWER LEVEL pad until desired power level is shown.
3. Press the number pad(s) to enter a cooking time.
4. Press START pad.
5. At end of cooking cycle oven beeps 3 times and shuts off.
Programming Items
This microwave oven has 20 programmable pads (1-20).
NOTE: Only pads 1-10 are preprogrammed at the factory.
1. Door can be in either open or closed position with
:0
showing in
display.
2. Press PROGRAM pad.
•
PROGRAM
appears in display.
3. Press desired number pad to be programmed.
• If pad 5 is being programmed,
PROG- -05
will appear in display.
• To program pads 11-20, press number pad twice rapidly. (ex. To
program pad 15, press pad 5 twice rapidly.)
4. Press POWER LEVEL pad to select desired power level.
• Press POWER LEVEL pad to change power level if desired (some
models).
•
POWER LEVEL
displays.
-
100%
indicates 100% (full) microwave power,
80%
indicates
80%,
60%
indicates 60%, and
40%
indicates 40% microwave
power. By continuing to press the Power Level pad, the power
level will cycle through each level continuously.
5. Press desired number pad(s) to program desired cooking time.
6. Press START/+30 SEC pad to save programming for Stage 1.
• If Stage 2 or Stage 3 is desired for programming, repeat steps 4
through 5.
• If Stage 2 or Stage 3 is not desired press STOP/RESET pad, to
end programming sequence.
NOTE:
If door is closed or STOP/RESET pad is pressed before
programming is complete, changes are discarded and
microwave exits programming mode.
Quick Start Reference Guide
So...how do I use it?
Oven Clearances
A—Allow at least 4" (10.2 cm) of clearance around top and
sides of oven. Proper air flow around oven cools
electrical components. With restricted air flow, oven may
not operate properly and life of electrical parts is
reduced.
B—Allow at least 4" (10.2 cm) between air discharge on
back of oven and back wall.
PROGRAM
DEFROST
QTY
2X
STOP/
RESET
START/
+30 SEC
CHECK
PROGRAM
POWER
LEVEL
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A
B