22
•
Check that the S-Video signal cable is connected
properly to S-VIDEO port at the rear of monitor.
•
Check that the S-Video signal cable is connected
properly to the video source.
•
Ensure that no pins are bent or pushed in the
connectors of S-Video signal cable.
NO VIDEO SIGNAL FROM VIDEO-IN
No signal input is detected from VIDEO port.
Check that the power switch of your video source is
in the “ON” position.
•
Check that the video signal cable is connected
properly to VIDEO port at the rear of monitor.
•
Check that the video signal cable is connected
properly to the video source.
MAIN CONTROL MENU LOCKED/
UNLOCKED
The main control menu (On-Screen Display menu) is
locked to avoid unwanted adjustment.
•
Press
,
,
buttons together for 5
seconds to unlock the main control menu.
WAIT FOR AUTOMATIC ADJUSTMENT
The monitor is detecting the input signal and then
adjusting automatically the monitor parameters
accordantly.
•
It takes around 5 seconds to finish the whole
process.
•
You are recommended to run auto adjustment
by pressing
(AUTO) button every time you
changed the resolution or refresh rate.
