manualshive.com logo in svg

AG Neovo X-17P, User Manual, Page: 17 / 44

Share
Download
AG Neovo X-17P User Manual Download Page 17

17

CHAPTER 3: USING THE LCD DISPLAY

3.1 Turning on the Power

POWER

 button / 

LED 

indicator

1

 

Plug the power cord to a power outlet 
or power supply.

2

 

Touch the 

POWER

 button to turn the 

LCD display on.

 

The LED indicator turns GREEN.

 

When the LCD display is turned on, 
touch the POWER button to turn off the 
LCD display.

 

The LED indicator turns off.

Note:

The LCD display still consumes 

 

♦

power as long as the power 
cord is connected to the power 
outlet. Disconnect the power 
cord to completely cut off 
power.

3.2 Selecting the Input Source Signal

SOURCE

 button

Notes:

After selecting an input source 

 

♦

signal, the input source signal 
message appears on the 
screen briefly.

 

For example, CVBS is selected 
the following message is 
displayed.

 

C V B S

I N P U T

If the selected input source 

 

♦

signal is not connected to the 
LCD display or is turned off, the 
no signal message is displayed 
on the screen.

N O

S I G N A L

If the resolution or the graphics 

 

♦

card of the connected computer 
is set too high, the input out of 
range message is displayed.

I N P U T   S I G N A L

O U T   O F   R A N G E

1

 

Touch the   button to select the input 
source signal.

Chapter 3: Using the LCD Display

Summary of Contents for X-17P













































Reviews:

No comments