background image

5

PRECAUTIONS

PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Symbols used in this manual

This icon indicates the existence of a potential hazard that could result in personal injury 
or damage to the product.

This icon indicates important operating and servicing information.

Notice

•  Read this User Manual carefully before using the LCD display and keep it for future reference.

• 

The product specifications and other information provided in this User Manual are for reference only. All 

information is subject to change without notice. Updated content can be downloaded from our web site at 

www.agneovo.com

.

•  To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may 

affect the determination of the warranty period.

Cautions When Setting Up

Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct 
sunlight.

Do not cover or block the ventilation holes in the housing.

Place the LCD display on a stable area. Do not place the LCD display where it  may subject to 
vibration or shock.

Place the LCD display in a well-ventilated area.

Do not place the LCD display outdoors.

Do not place the LCD display in a dusty or humid environment.

Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes. 

Doing so may cause accidental fire, electric shock or damage the LCD display.

Precautions

Summary of Contents for TX-3202









































Reviews: