23
USING THE LCD DISPLAY
3.5.2 PIP/PBP Swap
The main and the sub source signals set in PIP/PBP Setting can be
easily swapped using the keypad.
Main source
Sub source
Press the
q
button to swap the main source and the sub source
signals. See illustration below.
Main source
Sub source
3.6 Using FREEZE Function
Note:
♦
PIP/PBP Swap can only be
executed if PIP is enabled, see
page 38.
Hot Key:
Screen Freeze
The FREEZE function allows you to freeze the screen
image but still continues real-time playback until the
image is unfreeze.
Press the
u
button to activate screen freeze, the screen
freeze message is displayed on the screen.
F r e e z e O n
You can press any button to deactivate except the
POWER
button.
