GeoSteer®
39
PN 2006410—ENG Rev. B
Reset
From System tab, press Manage Settings button,
highlight Reset Factory Default from list on left,
and then press Reset button.
Press
to start factory reset. Press to
cancel reset.
System will notify when factory reset is complete.
Press
to acknowledge it. Reset is
complete.
SHUTDOWN DELAY
Shutdown of GCU controller can be delayed 1-
30 minutes using the Change Delay Time
button.
Select time delay setting.
Press
to accept Shutdown delay
change. Press
to cancel change.
HISTORY FILES
Log files stored within the system. Enables
technicians and service personnel to download
system information for diagnostics and
troubleshooting, at the request of support only.
Copy to display USB.
ACCESSORIES
The system was designed to allow additional accessories to be developed and attached to it over time if new ones arise.
Accessories menu is used to manage these optional attachments. Currently there are two options available for the system.
As needs change, additional accessories may be added in the future. Accessories are:
REMOTE SWITCH ENGAGE
Remote Switch Engage option allows user to connect an external device (foot switch, rocker switch, toggle switch, etc.) to
system harness. User can then use external switch to Engage AutoSteer by pressing switch. This allows operator an easier
way to engage AutoSteer so they do not have to reach up to the display in order to disengage autosteer.
Remote Switch Engage accessory is by default disabled. Remote Switch Engage accessory option will show user Current
Status (Enabled or Disabled) of switch and provide user a way to change that status. This screen has one option:
Enable (Disable)
—This button switches between two states after you push it. It enables or disables Remote Switch
Engage Only option.