34
SYSTEM HEALTH
System health screen provides quick diagnostic and status view for various aspects of the system. If a problem should
occur, this allows user to take quick glance at status of various sensors and see if any obvious problems appear. If they do,
user can look more closely at aspect that is not working.
To access different screens, use Blue Up/Down Arrows or buttons or directly select hardware group from list on right. Status
for each item is shown by one of three icons:
Green Check
—This indicates no problems detected.
Red X
—This indicates there might be a problem or feature code has not been purchased for this item.
E
xclamation Point
—Indicates that component is not ready yet.
System Health Components are broken down into hardware groups. Items inside each group change based
on which vehicle type is active.
Overview
—Provides overview of the system and provides a quick glance at which group may be causing problem so it
can be looked into more closely.
GPS
—Items that have to do with getting a position, includes GPS signals and correction signals.
Steering
—Items that have to do with interfacing with steering system.
Hardware
—This group has to do with hardware error checks. Displays when sensor values fall outside normal or expected
ranges.
Each item in group shows a specific item that is being monitored, a code that explains status, and a quick reference status
symbol that quickly alerts user to good, bad, or possible problems. Additional items can be scrolled to in same screen by
using Gray Up/Down Arrows at bottom of screen.
MANAGE SETTINGS
Manage Settings screens allow user to manage internal databases and logs files. Database stores all vehicle configuration,
calibration, and history information for system. Log files keep a running list of everything system has done. Manage
Settings screens available are:
Log Files
—Allows user to Copy or Delete internal log files.
Database
—Allows user to Backup or Restore databases.
Reset Factory Default
—Allows user to reset all settings back to default factory settings.