Afriso EURO-INDEX OWWG3 Series, Operating Instructions Manual

Page: 47 / 156

Safety
ÖWWG 3 7
2.4 Qualification of personnel
Only appropriately trained persons who are familiar with and
understand the contents of these operating instructions and all other
pertinent product documentation are authorized to work on and with
this product.
These persons must have sufficient technical training, knowledge
and experience and be able to foresee and detect potential hazards
that may be caused by using the product.
All persons working on and with the product must be fully familiar
with all directives, standards and safety regulations that must be
observed for performing such work.
2.5 Personal protective equipment
Always wear the required personal protective equipment. When
performing work on and with the product, take into account that
hazards may be present at the installation site which do not directly
result from the product itself.
2.6 Modifications to the product
Only perform work on and with the product which is explicitly
described in these operating instructions. Do not make any
modifications to the product which are not described in these
operating instructions.
2.7 Usage of spare parts and accessories
Usage of unsuitable spare parts and accessories may cause
damage to the product.

Use only genuine spare parts and accessories of the
manufacturer (see chapter 13, page 30).