Afriso EURO-INDEX OWWG3 Series, Operating Instructions Manual

Page: 46 / 156

Safety
6 ÖWWG 3
2.2 Predictable incorrect application
The ÖWWG 3 oil/water alarm unit must never be used in the
following cases:
•
Liquids which tend to become highly viscous or lead to
agglutinations or deposits
•
Liquids belonging to danger classes AI or AII
•
Hazardous area (Ex)
If the product is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions.
•
Damp, humid, wet rooms
•
Unprotected drip pans installed outdoor
•
Applications involving persons and animals
2.3 Safe handling
This product represents state-of-the-art technology and is made
according to the pertinent safety regulations. Each product is
subjected to a function and safety test prior to shipping.

Operate the product only when it is in perfect condition. Always
observe the operating instructions, all pertinent local and
national directives and guidelines as well as the applicable
safety regulations and directives concerning the prevention of
accidents.
DANGER Severe burns or death caused by mains voltage (AC 230 V,
50 Hz) in the control unit.

Do not expose the control unit to water.

Disconnect the mains voltage supply before opening the control
unit or before performing maintenance and cleaning work and
make sure it cannot be switched on by accident.

Do not tamper with the control unit in any way whatsoever.
WARNING Severe burns, explosions, deflagrations or fires caused by
temperatures of up to 100 °C at the probe tip.

Never touch the probe tip.
NOTICE Extreme ambient conditions may have an adverse effect on the
device.

Protect the product from humidity.

Protect the product from atmospheric influences and direct
sunlight.