Operation 17
4510003 Rev B
Running Product
1. Turn the Tunnel Power Switch to the ON position.
2. Press the
ASCEND
and
DESCEND
height adjustment buttons on the tunnel to set
the correct height for the product.
NOTE:
In Manual Mode, press the
ASCEND
button to raise the tunnel. Press the
DESCEND
button to lower the tunnel. In Auto Mode, the tunnel rises when the
conveyor has stopped. To use Auto Mode, the Conveyor Input wire must be
connected.
3. Turn on the Conveyor.
4. Turn on the
Fan
power button.
5. Turn on the
HEATER
power switch.
Fan Power Button
Heater Power Switch
Ascend Button
Descend Button
Tunnel
Power
Switch
Summary of Contents for ES-200A
