34
Fig.21. Display of the lack of NFC
5.5. ABOUT UNIT tab
The appearance of the
ABOUT UNIT
tab is shown on Fig.22. You
can read the parameter values by pressing the
READ
button.
Fig.22. ABOUT UNIT tab window
This tab displays the following parameters: software version of the
flow meter, serial number of the flow meter, nominal diameter (DN), op-
erating mode, checksum (CS) of the software, calibration factors, infor-
mation about the use of universal and logic outputs, values of output fac-
tors (if the universal output works in the frequency or pulse mode).
