8
Installing a Module
1 . Starting from the cB1 top, align bottom of the Module guiding tracks
A
with top of the cB1
guiding tracks
B
.
2 . Slide the Module into the cB1 base .
3 . Make sure that Module is completely inserted in the Module Slot .
4 . To secure Module, depress the two latch pins until fully seated
C
.
5 . Align Kickstand guiding tracks
D
with the cB1 base key slots
E
.
6 . Slide the cB1 with mounted Module into Kickstand until fully seated .
7 . For stationary use, flip-out the Kickstand handle
F
and position the assembled ROGUE
tester vertically on a flat surface .
1
2
3
4
5
6
7
2
3
1
A
B
6
4
C
5
E
D
7
F
ROGUE cB1 Overview